Shutting Off Your Water Main
Shutting Off Your Water Main
Blog Article
Just about every person will have their unique theory when it comes to How to Turn Off the Water in an Emergency.
One of the most typical locations a water pipe will certainly be found in house is in your boiler room, basement, or an eliminated panel in a section for your home.
Once you find the water main you will simply transform the shutoff clockwise to shut all the water off in your home until you have finished the repair work. Some homes will have a ball valve with a lever that you can draw as opposed to turn to shut the water off.
If you attempt to close the water off to your components by utilizing an angle stop and that doesn't work you will have to close of the water pipe to make your repair service. There are likewise lots of other reasons you might need to close the water pipe like fixing icy pipes, repairing leaks, changing components or taps.
Lots of people are not conscious that they even have a water main shutoff right in their very own home and just call a plumber of never ever end up doing the repair service up until things get actually negative since they simply do not know that shutting the water pipe is actually simple.
How to Find and Shut Off Main Water Shutoff Valve
Where is the main water shutoff valve located?
This is the million-dollar question. Your main water shutoff valve could be located in several different areas. If you have a home with a basement and crawlspace, it is probably located on an interior wall near the front of the house, where the water comes in from the water meter. In this case, it is most likely hiding in plain sight. If your home was built on a slab, the valve might be located near the hot water heater or inside your garage.
How to Turn Off Main Water Valve
Once you find the shutoff valve you will either hand turn it (clockwise for gate valves and perpendicular to the pipe for ball valves) or use the appropriate tool depending on the design.
If it is located inside your house, it will most likely be a gate or “wheel” valve that you’ll simply turn clockwise to stop the flow of water. Another way to shut off the water is to go to the water meter box. Just be careful not to mess with the city shutoff side of the meter.
Where are the isolation valves?
Isolation shutoff valves are much easier to locate. Most essential home plumbing fixtures have separate valves that control the water flow. Sinks, toilets, water heaters, and washing machines should have a small valve located near the plumbing that can easily shut off the individual water supply.
Simply turning the valve clockwise will turn off the water flow. Sink and toilet problems can be dealt with quickly by simply shutting off the supply this way. It’s always good to test the isolation valves periodically to make sure they are working properly.
Again, once your tighten the water shutoff valves and turn off the water, open up your hot and cold lines to release pressure and test if the water is indeed off.
Make it a priority to locate the water valves in your home – and keep plumbing problems from turning into costly repair situations.
https://happyhiller.com/blog/how-to-find-shut-off-main-water-shutoff-valve/
We were shown that report on How to Find and Shut Off Main Water Shutoff Valve through a good friend on our other web address. In case you enjoyed our page if you please be sure to pass it around. We appreciate reading our article about How to Find and Shut Off Main Water Shutoff Valve.
Order Repair Report this page